The main difference between the two covers that you mentioned is the application for the two.
The Classic Accessories DryGuard Waterproof Boat Cover # CA20085 is designed for bass and fishing boats whereas the Classic Accessories Boat Cover # 052963889383 is for a V-Hull boat.
Depending on which style of boat you have would dictate which cover would be best. view full answer...
The beam width of the Classic Accessories Boat Cover by StormPro, part # 052963889680, is 116 inches. The cover is not matched to specific boats, however, it is a semi-universal fit for boats between 22 and 24 feet long. view full answer...
The Classic Accessories Boat Cover, part # 052963889383 is designed to fit tight around the boat but does not fit around the motor.
There are so many motors available it would be tough to make a cover that would fit over the motor and provide a tight fit. We do not offer boat motor covers. view full answer...
You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover.
A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width... view full answer...
I contacted our representative at Classic Accessories and he recommend a Model C Cover, which fits boats 16 feet to 18-1/2 feet long. view full answer...
To determine if this Classic Accessories Boat Cover # 052963889482 will fit on your 2002 Fourwinns Horizon 180 you will need to take some measurements of your boat.
This cover is designed to fit boats that are 17 to 19 feet in length and boats with beam widths up to 102 inches.
If you measure the length and width of your boat and it fits in those measurements this cover should work for you. If not, email me back with the measurements of your boat and I can hopefully find one that does fit. view full answer...
The Classic Accessories Boat Cover by StormPro # 052963889185 fits 14 -16 foot boats with a beam width up to 75 inches. Since your boat meets those dimensions, the fact that it does not have a windshield is not going to affect how the cover fits. It features an integrated buckle and adjustable strap system as well as an adjustable elastic cord at the bottom of the cover to ensure a tight fit over your boat. view full answer...
Your boat at 19 feet and 96 inch beam length is within the tolerances of the Classic Accessories Boat Cover, # 052963889581. As far as width, it fits up to 106 inch wide boats. the extra foot of length should not be a hindrance either.
A similar cover that fits 17 to 19 foot boats and beam widths up to 102 inches is # 052963889482. This would be a tighter fit to your boat. I think the bow rails and the cuddy cabin would necessitate the larger cover though. view full answer...
I checked the beam width of a number of 18-foot Lund boats and they fall into the range of 88- to 98-inches. Since the Classic Accessories StormPro Boat Cover # 052963889383 fits boat lengths to 18-1/2-feet and beam widths to 98-inches it will work fine on the Lund boat. Since this craft is at the top of the covers size range, and since the cover has an elastic cord in the bottom hem, the fit should be snug and wrinkle-free. view full answer...
As long as your Crown Live is not wider than 106 inches the Classic Accessories Boat Cover by StormPro # 052963889581 is an excellent option as it has a boat length range of 20-22 feet. view full answer...
The Classic Accessories Boat Cover # 052963889482 should have no problem being used with an inboard/outboard motor as long as the dimensions of the boat are compatible with the cover.
This cover is designed for V-hull runabouts that are between 17-19 feet in length and a beam width of up to 102 inches.
I attached installation instructions for you to check out also. view full answer...
The Classic Accessories Large Pontoon Boat Repair Kit # CA32005 is intended for their Colorado and Rogue models and it does include a replacement inflation value and a valve wrench. For your medium-size Roanoke you can use kit # CA32012 which includes the same parts.
Individual parts like a replacement bladder and valve are offered directly from Classic Accessories. view full answer...
For your boat with a 68 inch beam the part Classic Accessories Boat Cover # 052963889185 is going to fit as it can fit beams that are near 75 inches. You will most likely have to remove the trolling motor though. Since they are designed for easy removal that shouldn't be too big of a problem. view full answer...
The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover.
For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests... view full answer...
The Classic Accessories 9 Foot Pontoon Boat # CA69660 referenced in your question does not include an air pump but you can add one with part # 052963611113.
This is a really nice, high-capacity pontoon boat that features a steel tube frame and heavy-duty, PVC and nylon pontoons for excellent durability. The boat has 20 pockets for storage, 2 insulated drink holders and combination fill/quick-deflation valves. view full answer...
The only difference between the green Classic Accessories 9' Pontoon Boat with Transport Wheel 69770 and the orange Classic Accessories 9' Pontoon Boat with Transport Wheel 69774 is the color. Other than that, they are the exact same thing.
They both have a transport wheel, 20 pockets, 2 insulated drink holders, dual removable gear bags, stripping basket, a wire storage/battery platform, a rod holder, and 2 detachable foam fly patches. view full answer...
Yes, the Classic Accessories boat cover # 052963889185 will work with your 15 foot Sylvan Alaskan as you have described it. The cover is designed for 14 to 16 foot long V-hull boats with a beam up to 75 inches. Your boat is right in the middle of all those specs so you should have a great fit! view full answer...
As long as your boat's beam (width of the widest point) does not exceed the 98 inches, the Classic Accessories DryGuard Boat Cover for 98" Beam # CA20085, it will fit your boat. I would not recommend choosing the larger size as boat covers are meant to fit snug to act as a seal to protect your boat.
However, if your boat beam is a little larger than 98" I would recommend the Classic Accessories DryGuard Waterproof Boat Cover for a 102" Beam # CA20086. This cover will provide the best... view full answer...
The Classic Accessories Boat Cover # 052963889284 referenced in your question is designed to fit boats that are between 14 and 16 feet long. Since your boat measures a bit longer than 16 feet, I recommend going up in length with the Classic Accessories # 052963889383. This is the same style cover as what you were looking at but it fits boats that are between 16 and 18-1/2 feet long. This will likely provide a better fit for your boat and can also work with wider boats with a beam width... view full answer...
I do have an option for you but all of our boat trailer covers are designed to be used with a boat on a trailer or in storage. That said, if you are able to find a way to secure the straps for the cover to the boat while in the water then I do not see any other reason as to why they would not work in this application as well.
In order to make sure we get you the correct cover I would need to know the widest point of your pontoon boat. If it does not exceed 96" then you can use the Classic... view full answer...
Go To Results